Greasolve 4Kg Concrete Cleaner (Tub)
Heavy Duty Granular Concrete Cleaner
Greasolve is a biodegradable, highly alkaline granular quick-break degreaser designed especially for the removal of grease and oil spills from concrete floors. Greasolve is ideally suited to the cleaning of garage and workshop floors, driveways and carparks. Greasolve may also be used in soak-tank degreasing applications for the removal of grease and oil from ferrous metal parts. The quick break property of Greasolve ensures that the emulsified grease and oil rapidly separate in a grease trap, allowing the resultant water layer (after pH post-treatment) to be drained to the sewer as treated trade waste.
APPEARANCE:White granules, Pine odour
DIRECTIONS FOR USE:
Wear suitable protective clothing, including gloves. Wash the hands and face thoroughly after use.
For the cleaning of concrete floors:
Wet the area to be cleaned with water. Sprinkle Greasolve liberally over the floor. Scrub well with a hard broom. Allow sufficient time for the Greasolve to penetrate the grease and oil spills (about 10 minutes). Scrub the area well a second time with a hard broom before the floor is dry, then hose the area clean. For old or heavy spills, a second application may be required.
For use in soak-tank degreasing applications:
Make up a 3 to 4% solution of Greasolve in water by adding 300 to 400 g (2 to 2½ cups) of Greasolve for every 10 litres of water. Hold the solution at 90 degrees C. Dip the metal parts into this solution until the parts are cleaned and degreased, then rinse the parts with water.
For safety and materials handling information, refer to the Material Safety Data Sheet for this product.
The information herein is, to the best of our knowledge, correct and complete and should not be construed as guaranteeing specific properties. No warranty express or implied is made as to its accuracy, reliability or completeness.