Surface Mould Remover 1 Litre

Surface Mould Remover 1 Litre

Cleaning mould should be easy and SAN-AIR Surface Mould Remover makes sure that removing any visible mould you have and ensuring that it stays gone is a simple matter.

Features

1. Immediate visible mould removal
2. Long-lasting
3. Scientifically tested
4. Environmentally friendly and Exceptionally safe to use
5. Ready to use, easy to apply

SAN-AIR has been independently tested and confirmed to remove 99.99% of Surface mould and Bacteria.

SAN-AIR protects the cleaned surface for up to 12 months. Keeping you and your family safe from any mould or bacteria contamination.

Note: The surface mould remover does not come with a trigger spray nozzle.

Clean Mould Yourself – Safely

SAN-AIR_tm Surface Mould Remover thoroughly cleans any surface of mould without any toxic chemicals.  Simply spray onto any surface leave 15 minutes then wipe away.

Easy to use 100% safe for people, pets, property No toxic chemicals Biodegradable Sustainable Fast-acting

Neutralise toxic mould and mildew Neutralise bacteria Removes the root of the mould Remove odours Reduce your mould cleaning frequency Reduce your environmental impact

100% natural active ingredients

This product uses 100% natural Australian essential oils. This means that, unlike other cleaning products, it will not cause damage to your property when applied. It will safely remove the mould so that you can be stress-free.

Instructions

SET UP

• Adjust the nozzle to a fine spray, test the surface you want to clean by spraying a small area first.
  (Note it is normal to see the surface lighter in colour while wet).

CLEAN
Spray to coat mould evenly, wait 15 minutes and wipe the mould off with a clean dry cloth.

• Ensure that dirty clothes are not reused as you will spread the mould. Instead, for each wipe, use a clean area of the cloth until the cloth is used up, then continue cleaning with a new clean cloth.
• Repeat step 2 until all mould has been removed.

FINISH

• Use a final spray with a fine mist and allow to air dry, leaving a fine mould prevention coating.

Follow the instruction on the label to get maximum results.